New Energy Efficiency S13-NX3 Series 10 kV Three-Phase Fully Sealed Oil-Immersed Distribution Transformer
Keywords:
New Energy Efficiency S13-NX3 Series 10 kV Three-Phase Fully Sealed Oil-Immersed Distribution Transformer
Category:
Product Description
Product Overview:
The new energy‑efficient, energy‑saving transformer utilizes high‑grade grain‑oriented silicon steel for the core and oxygen‑free copper with excellent electrical conductivity for the windings. It achieves a no‑load loss reduction of over 30% and a load loss reduction of more than 20%, resulting in an overall loss reduction of 25%. During grid operation, this design maximizes the economic benefits of energy‑saving transformers.
Product Features:
1. Reduce no-load losses.
Employing high-performance silicon steel laminations with a five‑step lap joint, the core structure and manufacturing process have been optimized to reduce the process factor. The silicon steel laminations are not stacked with the upper yoke and undergo an uncoated treatment, while shear burrs are kept below 0.02 mm.
2. Reduce load losses.
Wires are drawn from oxygen-free copper rods, which have higher electrical conductivity than electrolytic copper, thereby enhancing the conductor’s conductivity. By appropriately reducing the current density, optimizing the insulation structure—employing semi-oil channels, pre‑formed insulation components, integral winding assembly, self‑adhesive wire, and self‑adhesive paper—we can minimize the insulation volume, increase the winding fill factor, and reduce the winding dimensions, thus lowering load losses.
3. Reduce wear and tear on other components.
Improving the core structure: Refine the design to control winding leakage flux and optimize ampere‑turn balance, thereby reducing stray losses in structural components such as the oil tank. Employ corrugated oil tanks and plate‑type radiators to enhance heat dissipation efficiency.
Ordering Instructions:
When placing your order, please provide the following parameters:
1. Product Model
2. Rated Capacity
3. Voltage Combination
4. Scope of Adjustment
5. Frequency
6. Connection Group Designation
7. Short-circuit impedance
8. For products with special requirements, specify the technical specifications.
Technical Data Sheet for the New Energy-Efficient S13-NX3 Series 10 kV Three-Phase Fully Sealed Oil-Immersed Distribution Transformer
|
Rated Capacity ( k VA) |
Rated voltage |
Connection Group |
No-load current ( %) |
No-load loss ( W) |
Load loss ( W) |
Impedance voltage ( %) |
|
|
High pressure ( kV ) |
Low pressure ( kV ) |
||||||
|
30 |
6 ±2×2.5% or 6.3 ±2×2.5% or 10 ±2×2.5%
|
0.4 |
Yyn0 Dyn11 |
2.1 |
80 |
600/630 |
4
|
|
50 |
2.0 |
100 |
870/910 |
||||
|
80 |
1.8 |
130 |
1250/1310 |
||||
|
100 |
1.6 |
150 |
1500/1580 |
||||
|
125 |
1.5 |
170 |
1800/1890 |
||||
|
160 |
1.4 |
200 |
2200/2310 |
||||
|
200 |
1.3 |
240 |
2600/2730 |
||||
|
250 |
1.2 |
290 |
3050/3200 |
||||
|
315 |
1.1 |
340 |
3650/3830 |
||||
|
400 |
1.0 |
410 |
4300/4520 |
||||
|
500 |
1.0 |
480 |
5150/5410 |
||||
|
630 |
0.9 |
570 |
6200 |
4.5 |
|||
|
800 |
0.8 |
700 |
7500 |
||||
|
1000 |
0.7 |
830 |
10300 |
||||
|
1250 |
0.6 |
970 |
12000 |
||||
|
1600 |
0.6 |
1170 |
14500 |
||||
|
2000 |
0.6 |
1360 |
18300 |
5.0 |
|||
|
2500 |
0.5 |
1600 |
21200 |
||||
Note: For transformers with a rated capacity of 500 kVA or less, the load loss values above the diagonal line in the table apply to the Yyn0 connection group, while those below the diagonal line apply to the Dyn11 connection group.
Related products
Product Inquiry
Company Address: Hai’an Industry Park, Hai’an County, Jiangsu
Sales Hotline:0086-0513-88780188
After-sales service:0086-0513-88782288
Fax: 0086-0513-88782959
Postal code: 226600
Website:www.jsmadq.com
Email:jsmadq@sina.com 2930515310@qq.com
Scan to view the mobile version
无数据提示
Sorry, this section is currently being updated. Please stay tuned!
You can view other sections or return to the previous page.Home